From the ground to the barn.
Round bale trailers, bale loaders, pasture renovators, chisel plows and disc harrows.
Five families, one factory
Every Hay King machine is built by K&M Manufacturing Co. Specifications below are the published factory numbers. Ask for a quote on any model and we will route it to you or to your nearest dealer.
Balanced saddle carriers dump one bale at a time with an easy operating spring release pin. Bumper pull or gooseneck, 2 through 7 bales. A 2-bale carrier trails behind a 5-bale to move 7.
| Carrier | Capacity | Hitch |
|---|---|---|
| 2-bale | 2 round bales | Bumper pull |
| 4-bale | 4 round bales | Bumper pull |
| 5-bale | 5 round bales | Gooseneck |
| 5 plus 2 | 7 round bales | Gooseneck plus trailing 2 |
Three-point hitch or front-end-loader mount, solid points, Cat I and Cat II. Double-fork carriers move two bales at a time.
| Model | Mount | Bales |
|---|---|---|
| Model 10 | 3-point | One |
| Model 30 | Front-end loader | One |
| Model 30-SHD-2 | Skid steer / 3-point | Two |
| Model 50 | Front-end loader | One |
A coulter cuts sod in front of each parabolic-curve chisel to reduce clods. The chisel lifts sod while fracturing soil so air, water and fertilizer reach the roots. Packed cow paths are broken up to help grass regrow.
| Model | Mount | Note |
|---|---|---|
| C-3 | 3-point | Coulter and chisel |
| C-4 | 3-point | Wider than C-3 |
| C-8 | 3-point | Widest renovator |
| Chisel plow | 3-point | Shanks fracture without turning |
Gangs of notched or smooth blades on 7.5 or 9 inch spacing. The model number is the machine: DM 2420 is 24 blades at 20 inch. Weight is the selling point. A heavier disc cuts harder ground.
| Model | Blades | Weight | Transport |
|---|---|---|---|
| DM 1216 | 12 at 16 in | 520 lb | 4 ft 1 in |
| DM 2420 | 24 at 20 in | 960 lb | 8 ft 4 in |
| PDM 3220 | 32 at 20 in | 2,510 lb | 10 ft 6 in |
| OPDM 3222 | 32 at 22 in | 2,900 lb | 11 ft 6 in |
| SPDM 4022 | 40 at 22 in | 4,800 lb | 16 ft 0 in |
The Miller line has been built by K&M since 1996. Series I through VII, Cat I and Cat II, rigid and fold-up flex frames in 6 by 4 and 6 by 6 steel tubing with 1/4 and 3/8 inch wall.
| Series II model | Frame |
|---|---|
| 2200 | Rigid |
| 2300 | Two section flex |
| 2400 | Three section flex |
Where to buy
Hay King equipment is sold direct from the shop in Taylor and through dealers across Texas and neighboring states. Call and we will route you to the closest one.
512-352-2588| Dealer list | Dealer list coming |
Lines we carry
Alongside our own machines we are a dealer for Vermeer hay tools, including balers, rakes and mowers, and for Bush-Whacker rotary cutters. Call the shop for availability and lead times on either line.
Hay King equipment is sold direct from Taylor and through a dealer network across Texas and beyond. Send a quote request and we will point you to the closest source for the model you want.
K&M Manufacturing Co, Inc.
The Malish family has built Hay King equipment in Taylor since 1980, and the Miller-Johnson disc line since 1996. Same shop, same paint, same phone number.
Phase one ordering
Tell us the model and where the machine is going. We answer the phone at 512-352-2588 during shop hours, and every form below reaches the same desk.
